Aten Differential Pressure and Temerature SensorManufacturer PN: EA1440
Stock: Out Of Stock - Call
For the security of your data center, ATEN provides Photo Door sensor probes that work in tandem with the Power Distribution Units, which allows the monitoring of a rack mounted enclosure´s door access, notifying users when a door has been opened. Various conditions can be monitored with alarms according to customizable minimum/maximum settings.
* The Sensor is an optional accessory and you can use the ATEN PDU without the door sensors. However, if you want to have complete security management of your data center with the full use of ATEN solutions, a sensor installation is required.
The Photo Door Sensor allows the monitoring of a rack mounted enclosure´s door access – notifying users when a door has been opened
Sensing distance 10 cm
Operating voltage 10 - 30 VDC; Ripple<20% Peak to Peak
Current Consumption 30 mA(Max)
Output method NPN & PNP Two Output
Output status Normal open NO type
Output current 150 mA(Max)
Leakage current 0.8 mA(Max)
Residual voltage 0.6 mA(Max)
Protection circuit Short Circuit & Polarity Protection
Sensor Response Time 1 ms(Max)
Sensitivity adjuster 270° Trimmer
Hysteresis 10% of Sensing Distance Max
Emitter Infrared LED
Illumination Sunlight < 10,000Lux.; Lamplight < 5,000Lux.
Note For some of rack mount products, please note that the standard physical dimensions of WxDxH are expressed using a LxWxH format.
Aten Differential Pressure and Temerature Sensor
Warranty: 12 months
Size: 1000x10x10 mm
Weight: 0.06 Kg
We Also Recommend
Aten 3m DisplayPort Cable, supports up to 8K (7680 x 4320 @ 60Hz), DP 1.4, High Bit Rate 3 (HBR3) bandwidth of 32.4 Gbps
Aten 4.6m DisplayPort Cable, supports up to 4K (3840 x 2160 @ 60Hz), DP 1.2, High Bit Rate 3 (HBR3) bandwidth of 21.6 Gbps
Aten 4 Port USB 3.0 4K 60Hz Dual HDMI KVMP Switch, Video DynaSync, switching via RS232, hotkeys, pushbuttons and mouse, supports up to 4096 x 2160